High Quality Commercial 100 Tons 3mx18m Electronic Truck Scale for Portable weighbrige
Features:
Mainly by the following components:
pounds, high-precision sensors, weighing instruments, cameras, railings, to sense the coil, red and green lights, RF card reader, image acquisition card, lighting systems, computers, printers, weighing management Software;
*The vehicle in the weighing process without personnel custody, automatic;
*The system administrator will RF card sent to the driver, the above car number has been entered and other content, the driver can be posted on the car before the card windshield. To a few meters away from the weighing platform, the reader detected the arrival of the vehicle, in determining the scale platform without vehicles weighing pounds, the import of railings open, so that vehicles through, open the platform scale;
*In the vehicle parked, the camera automatically captured the vehicle number of the photos, stored in the computer;
*The computer reads the weighing data of the instrument and saves it;
*Weighing is completed, the export of railings lifted, so that cars out of the weighing platform;
*At the exit, place a single pound printer, and the driver tore off the printed pound and leave.
Functional characteristics:
1.Digital communication technology;
(1)It adopt RS485 bus technology to realize the long distance transmission of signals, and the transmission distance is not less than 1000 meters;
(2)The output digital signal amplitude of 3~4v, so that anti-interference ability is enhanced, while improving the system against lightning ability;
(3)The result of bus is convenient for the application of many weighing sensors. In the same environment system, 32 weighing sensors can be connected.
2.Intelligent technology
(1)Preventing using simple circuit to change the weighing signal and size;
(2)Sensor parameter can be changed according to instructions;
(3)Memory capability eliminates calibration problems after changing sensors;
3.Digital calibration technology
(1)Making weighing the load (four corners) calibration one time completed automatically;
(2)Making the weighing instrument range calibration finished one time;
(3)The range factor and zero value of the weighing instrument can be modified according to the requirements, and the coefficients and zero parameters of each sensor can be modified.
4.Fault diagnosis technology
(1)It has ability to diagnose zero value variation of weighing instrument;
(2)It has ability to diagnose the value of the zero point of each sensor;
(3)It has ability to diagnose changes in the communication of each sensor;
(4 It has ability to judge the address and number of the sensor after replacing the sensor;
(5)It has the ability to raise multiple operating error messages.
1.Do you calibrate scale before shipment?
Yes,we already calibrate scale and testing all part before the shipment,then it can use working directly after install.
2.How to install scale?
The detail install manual is prepared together with scale,
Also technical engineer can be visiting supervise install if you required.
3.Who should i contact for service(repair,calibration)?
You can contact through sales to feedback to keda technical center department to get prompt service for repair and calibration.
4.Warranty
One years for truck scale/weighbridge platform structure and component part.
5.Delivery Term
We accept EXW,FOB,CFR and CIF,etc.
6.Payment
1).T/T
2).L/C at sight
3).MIC Trade Assurance
4).Western Union
Transportation
Audited Supplier 
Functional characteristics:
){kind=link}
){kind=link}